Updating MXQ Pro 4K to the latest version is mandatory as it improves the performance of the device and removes temporary bugs. Apart from that, it also introduces new features to the device. You can update the MXQ Pro 4K Android TV Box by navigating to the About Settings. Alternatively, you can also use the Amlogic USB Burning Tool on your Windows PC to update the firmware of MXQ Pro 4K devices. Here, we have explained both procedures with necessary screenshots to ensure that your device works without any errors.
How to Update MXQ Pro 4K Firmware From Settings
1. On the home screen of MXQ Pro 4K, navigate to the Settings menu and launch it.
2. On the Settings page, choose the About option.
3. Tap the System Update option at the start of the page.
4. The system will scan for the latest firmware. If there is an update, download it and then restart the device to install the firmware.
5. After updating the firmware, you can use the device normally.
How to Update MXQ Pro 4K Firmware With USB Burning Tool
1. Download the latest MXQ Pro firmware from the provided MEGA link and the Amlogic USB Burning Tool from this link.
2. Extract the ZIP file containing the USB Burning Tool, install it on your PC, and launch the program.
3. Turn off the MXQ Pro 4K, hold down the Reset button, and connect the device to your PC with the USB cable. Make sure to hold down the reset button until the last step.
4. Run the USB Burning Tool and select Next in the setup dialog box. If the interface is not in English, switch the language from the second menu option.
5. Go to the File menu, choose Import image, and upload the MXQ firmware file.
6. Ensure the Overwrite key option is unchecked, then click Start to initiate the update.
7. Monitor the progress, and once the update is complete, click Stop and release the Reset button.
8. Disconnect the MXQ Pro from your PC and reconnect it to your TV to verify that the new firmware is installed.
Troubleshooting Update Issues on MXQ Pro 4K
If you face any problems after updating the device, refer to the troubleshooting solutions mentioned below.
- If WiFi connectivity frequently disconnects after the update, disconnect and reconnect the MXQ device to the WiFi router. Otherwise, try restarting the device and router.
- If the updation process is stopped and displays a black screen for a long time, then power cycle the device by unplugging and replugging the power cable.
- Check whether the power supply is stable or not.
- If none of the steps work, reset the MXQ Pro 4K using the physical button and set it up again.
Frequently Asked Questions
No. The MXQ Pro cannot be updated via USB drive as it doesn’t support detecting firmware from USB storage.
Yes. You can upgrade your MXQ Pro to the latest Nougat Android version (7.1.2) at no cost.
